Fallkniven CBNC

Fallkniven CBNC

Fallkniven Cubic Boron Nitride

Cubic boron nitride (CBN)
Cubic boron nitride is an extremely hard synthetic, crystalline material. CBN is superior in terms of abrasion resistance and oxidation resistance in contact with steel alloys. It is especially good to use for stainless steel knives and hardened stainless steel cutting tools. CBN is not harder than diamond but is thermally and chemically more stable than pure diamond. Another feature of the CBN sharpener is that it retains its shape no matter how much it is used. In addition, this coating is located on both sides of this profiled stone. Grit size 25 micron, e g “fine”.

Size: 85 x 54 x 3,6 mm
Weight: 130 grams

How to use your CBN sharpener
If your knife is dull, we advise you to start with the diamond stone. After restoring the edge to original shape, de-burr the edge lightly with the ceramic stone in order to get a razor-sharp edge. Use no oil or water. Start by laying the blade flat on the stone, raise the blade spine approx. the thickness of the blade, and start moving the knife in circular motions.